Hygienic GRP Sliding Doors
- Dortek’s sliding hygienic doors have been designed for non-fire rated areas.
- Sliding doors are regularly used in this sector as they increase the size of the door opening.
- Sliding doors can operate manually or under automation.
- Durable but flexible design means that these doors can stand up to operational traffic and wash down routines.
- Our systems can be connected to many types of activation devices from basic push button to a fully integrated Building Management System.
Ecosprint Syncro Door
- The ECOSPRINT Syncro is a Double-leaf, synchronous and side-opening high speed door.
- The classic Butzbach high-speed door that rolls the door skins of both door halves to the side in a fraction of a second.
- Offers maximum reliability and economic efficiency in the long term.
- The ultimate fast action door with a closing speed that reduces draughts and heat exchange.
- The full clearance height is immediately available.
- Minimal collision damage.
- Available in sizes up to 3500 mm x 3500 mm.
- Closing speed max. 1,5 m/s; Opening speed max 3,0 m/s.
- The classic in terms of design, a latest-generation high-speed door in terms of technology: spring force pulls both door leaves open at the same time and rolls them into a compact stand profile.
- Double leaf, synchronised side-opening high-speed door
- For widths up to 4.5 m and heights up to 4.5 m.
- Opens at up to 5 m/s (with option Sprint).
- Ideal for fast logistics processes in the hall, forklift traffic, entry air locks.
- Space and time-saving solution for unhindered, non-contact pedestrian traffic. As a high-speed door opening to one side, NOVOSPRINT Mono was designed specifically for narrow passage openings. It offers many advantages compared to hinged, swing or sliding doors.
- The most important feature is that with a rebate profile depth of just 35 mm on the wall side, this installation variant makes almost the entire opening width available for use.
- High-speed door opening to one side.
- Minimum space requirement.
- Fully automatic function for pedestrian traffic.
- Ideal for confined installation situations and highly frequented routes, e.g. in retail or in the healthcare sector.
- NOVOSPRINT Duo doors have two leaves that can be activated independently of each other in one opening.
- That makes them ideal for separating vehicular and pedestrian traffic or creating a two-lane forklift route, e.g. for safety reasons.
- If the entire width is needed at any time, all that needs to be done is to open both leaves and remove the lane partition
- Side-opening high-speed door with asynchronous and individually controllable leaves.
- Width up to 4.5 m and height up to 4.5 m
- Ideal for separating lanes and pedestrian accesses in one opening.
Novosprint Syncro Xl
- Fast, safe, trouble-free: you can rely on all the NOVOSPRINT benefits even with large openings.
- SyncroXL allows you to protect highly frequented passage openings reliably and minimise the opening times.
- Double leaf, synchronised side-opening XL high-speed door
- For widths up to 9 m and heights up to 6 m.
- Ideal for heavy goods vehicles and large rail vehicles, forklift traffic, entry air locks.
High Speed Vertical Doors
- Designed to save energy and create better working conditions where fast access is required.
- Dortek's range of high-speed doors are eco-efficient high-speed internal and external doors designed to prevent cross-contamination, save energy consumption and reduce the sound of noisy plant and guard machinery.
- Our durable exterior doors are designed to cope with heavy usage and demanding weather conditions, while their fast operation improves productivity and helps lower energy costs by reducing the impact of pressure and temperature changes.
- Our robust internal doors also improve hygiene and sound insulation and are suitable for clean, industrial and cold room applications.
- Withstands high wind & over pressures
- Reduces energy costs & cross ventilation
- Pass through hatches are often vital to a cleanroom’s efficient operation, whether it is raw materials in, finished product or packed items out or the throughput as part of the manufacturing process.
- Hygienic transfer hatches/trolley hatches and are designed to provide a safe and easy way to transfer products or materials between clean rooms and adjacent non-sterile areas.
- Dortek’s range of hygienic transfer hatches has either electromagnetic or mechanically interlocked doors to prevent depressurisation and minimise the risk of contamination.
- The doors are deliberately not sealed in order to allow a small volume of air from the clean side (which is normally at higher pressure) to continuously flush the interior of the hatch. This volume is so small by comparison with room air flows, that it will have no perceptible effect on room pressures.
- Dortek offers a wide range of standard-sized, custom made and lead-lined hygienic transfer hatches.
Spacelite Stacking Doors
- The Butzbach SPACELITE stacking door has been designed specifically for application in industrial or workshop buildings.
- The twin-walled design of the fibreglass element enables excellent thermal insulation; a complete seal prevents unnecessary energy loss and draught. The robust door material is resistant and absorbs impact. Our stacking doors are weather and corrosion-resistant, making them suitable for harsh environments.
- Upon opening, the separate light-transmitting fibreglass door panels stack safely and compactly in a cassette behind the lintel. Lighting fixtures, transport devices, air ventilation units or other equipment on the ceiling are not influenced by the structures.
- Due to the wall attachment, the minimum space requirement and the adaptability the door can be installed in nearly any situation, also in case of refurbishments.
- A service free gear motor (400 V) with a break and thermal overload protection guarantees reliable opening and closing. Mechanical overload protection as an additional safety feature is also available. In case of a power failure mechanical opening possible.
- Door widths up to 15 m
- Lasting durability
- Minimal follow-up costs
- Installation and Service from a single source
Sectiolite Sectional Doors
- The Butzbach SECTIOLITE combines the opening technology of a sectional door with the product and material related benefits of fibreglass. Offering individual adaptations with many optional accessories, it was conceived to fulfil the highest demands in solidity and endurance.
- A trouble-free operation is ensured by the absence of wear- or risk-sensitive components like torsion springs or protruding hinges. The result is a long-lasting and cost-effective availability of the door.
- Upon opening, the door sections are deflected and guided along with the ceiling into the interior of the building. The door is particularly suitable for constructions with low lintel since the standard version merely requires a lintel height of 300 mm.
- The SECTIOLITE door achieves outstanding values regarding air permeability, resistance to wind load and resistance to water penetration. The twin-walled fibreglass panels ensure good thermal insulation is achieved and a seal around the door prevents unnecessary energy losses and draft in the building.
- The door also offers numerous design options including three colour options, colour coated aluminium profiles and fibreglass incorporating images.
- Minimal follow-up costs
- Installation and service from a single source
Dortek Fire Roller Shutter Doors
- Suitable for environments which require a fire protection barrier for up to 4 hours.
- The shutter utilises a curtain assembled from sections of 2” flat lath which allows for a more compact box.
- Heavy duty T-section bottom rail.
- A push button station or key switch provides normal, everyday operation.
- Powered by 240v tubular motor
- Tested to BS EN 16034:2014 & BS EN 13241-1:2003.
- Galvanised as standard (curtain, guides and canopy) with primer painted fixing angles and end plates, or fully polyester powder coated to a RAL or BS colour.
Sliding Chiller and Freezer Door
- DT7 sliding freezer door - 40° C
- Single 1000 - 1600mm x 2100 - 2400mm WxH
- Manufactured in 100mm increments were applicable
- Door blade - 170mm thick high density injected polyurethane core
- Finishes - Food safe polyester coated White (RAL9010) or stainless steel.
- Gaskets - Tough rubber tubular gasket for perfect sealing
- Sliding movement
- System is airtight
- Resistant to extremely low temperatures
Request A Quote
Contact our team to discuss how Dortek can assist you with your upcoming project. One of our experts will get back to you shortly.
Tell us about your project
Need Technical Info
Our Dortek team are here to provide you with the best technical support possible. We can answer any questions you have about our products, support service, specification advice, pricing and tendering support, CPD training or any technical guidance you may need.